Difference between revisions of "Manuals/Userful Network Video Wall/Station Mapping/BlackMagic DeckLink Capture"

From Userful Support
Jump to navigationJump to search
(Created page with "coming soon.")
 
Line 1: Line 1:
coming soon.
+
__NOTOC__
 +
{{DISPLAYTITLE: Station Mapping : HDMI Capture}}
 +
{{CopyrightNotice|{{REVISIONYEAR}}}}
 +
 
 +
 
 +
==Introduction ==
 +
 
 +
HDMI Capture Session Container will cast HDMI output from any playback device (PC, Mac, Smart phone, tablet, Gaming Console, Cams, etc) on a station or multiple stations in a video wall setup. In other words, this session container allows you to cast the HDMI output from any PC. <br>
 +
 
 +
Please consider following points before using this session container:
 +
* Content with HDCP (High-bandwidth Digital Content Protection) will not play
 +
* Blackmagic Design Intensity Pro capture card should be installed on host PC. For product details visit: https://www.blackmagicdesign.com/products/intensity/models
 +
 
 +
<br>
 +
<br>
 +
 
 +
==Station Mapping: Creating HDMI Capture Session Container ==
 +
[[Image:HDMI_Capture.png|thumb|right|400px]]
 +
* To do so, click on "New Session Container". Give the new session container a name, and then use the drop-down menu to select "HDMI Capture" as the session type
 +
<br>
 +
* Set the mode from the drop-down list (Mode represents output resolution and frames per second)
 +
<br>
 +
* Set the scaling and click "OK" to complete the process.
 +
 
 +
<br clear="all"/>
 +
The content of your HDMI output device will play on the display(s) or video wall added to this session container
 +
 
 +
==Map Stations to Session Container==
 +
 
 +
Once session container is created, stations can be "mapped" or assigned by simply dragging-and-dropping the station icons to the session container. <br><br>
 +
'''Note: Changes will not take effect until the "Apply" button is clicked. '''
 +
 
 +
 
 +
{{forcewhitespace}}
 +
[[Category:Manuals]]

Revision as of 20:54, 7 December 2014


Copyright © 2014 Userful Corporation. All rights reserved.
(Updated 2014.12.07)


Introduction

HDMI Capture Session Container will cast HDMI output from any playback device (PC, Mac, Smart phone, tablet, Gaming Console, Cams, etc) on a station or multiple stations in a video wall setup. In other words, this session container allows you to cast the HDMI output from any PC.

Please consider following points before using this session container:



Station Mapping: Creating HDMI Capture Session Container

HDMI Capture.png
  • To do so, click on "New Session Container". Give the new session container a name, and then use the drop-down menu to select "HDMI Capture" as the session type


  • Set the mode from the drop-down list (Mode represents output resolution and frames per second)


  • Set the scaling and click "OK" to complete the process.


The content of your HDMI output device will play on the display(s) or video wall added to this session container

Map Stations to Session Container

Once session container is created, stations can be "mapped" or assigned by simply dragging-and-dropping the station icons to the session container.

Note: Changes will not take effect until the "Apply" button is clicked.