Network Zero Client Stations

From Userful Support
Jump to navigationJump to search

Copyright © 2015 Userful Corporation. All rights reserved.
(Updated 2015.08.07)

To return to the Userful Network Video Wall main documentation page, Click Here.


Userful's Video Wall solution enables customers to group together multiple displays/stations to form a single large display, thus enabling a single host PC to support one or more larger displays. This is possible because of the high performance and throughput of Userful's zero-client solution and the high performance video splitter developed by Userful. Video Wall is supported in a variety of configurations and layouts (equidistant grid, or free-layout and artistic).

Compatible Devices

Compatible Network Zero Client Devices

Userful Network Video Wall™ is designed to support network zero client devices (using the Elite Silicon® (EST) USB to LAN chipset) with the SMSC®chipsets.

Userful has tested and confirmed that the following devices are supported for use with Userful Network Video Wall™.

Network Zero-Client Devices Recommended Device Firmware Graphics Chipset External Power Supply Required
Acer E400 039.100 SMSC UFX-6000 Yes
Atrust m320 039.100 SMSC UFX-6000 Yes
Centerm C75 039.100 SMSC UFX-6000 Yes
HP T200 035.226 SMSC UFX-6000 Yes
ViewSonic VMA-25 039.100 SMSC UFX-6000 Yes
ThinNetworks MiniPoint Ethernet 039.100 SMSC UFX-6000 Yes
ViewSonic SC-U25 039.100 SMSC UFX-6000 Yes
Centerm C75(V2) 039.100 SMSC UFX-6000 Yes

Please Note that ThinNetworks MiniPoint devices are shipped with a jumper switch. The jumper switch toggles the device between an "always on" mode (ideal for digital signage and public computing environments) and a "normal" mode where power is controlled by power button. Please consult your sales representative for more information.

Getting Started

Station setup should be done after installation of Userful Video Wall is complete.

Some things to remember:

  • Even when using network zero client stations, it is important to keep one station connected to the onboard video card in order to see startup messages.
  • We recommend the use of homogeneous (all one type and model) network zero client devices.
  • Network zero client devices MUST be on the same subnet as the host PC to function.
  • If there is more than one host PC on a subnet, they must have unique hostnames. This is because network zero client devices are locked to host PCs based on the system name (or "hostname"). Having duplicate host names on one subnet cause erratic behaviour of the network devices.

Setting Up Stations

An example of a network station configuration.
  1. Position one display to be plugged into the system tower; this is the onboard station. Input devices (keyboard and mouse) can be plugged directly into the system tower as well (for either PS/2 or USB connections); however Userful recommends using a simple USB hub with audio input/output for connection of the onboard station input devices.
  2. Connect one display to each zero-client device.
  3. Using Cat-5e network cable, connect each device to a gigabit-capable switch (or router, depending on network setup). See example to the right.
  4. Connect the host PC to the switch (or router) using Cat-5e network cable.
  5. Ensure all devices, hubs and displays are connected to a UPS or surge protected outlets, if necessary.
  6. Turn on the system when ready.

Adding or Removing Network Zero Client Stations

To add a station (assuming your license supports that number of stations), simply connect another device and use the Control Center to attach the device to the host PC.
Please note: it may take up to 60 seconds for the newly added station to be recognized by the host PC. No reboot is necessary.

Stations can be removed simply by unplugging the device (even from a running system).