Difference between revisions of "Docs/Mapping/RTP Streamer"

From Userful Support
< Docs‎ | Mapping
Jump to navigationJump to search
 
(5 intermediate revisions by one other user not shown)
Line 2: Line 2:
  
 
{{DISPLAYTITLE: Mapping: RTP Streamer}}
 
{{DISPLAYTITLE: Mapping: RTP Streamer}}
{{CopyrightNotice}}
+
{{CopyrightNotice|{{CURRENTYEAR}}}}
  
 
{{DocsMainReturn}}
 
{{DocsMainReturn}}
 +
 +
<br>
 +
{|{{Notes}}
 +
|
 +
'''Note:''' This page has been updated in our new Support Portal - [https://docs.userful.com/software/userful-control-center/control-center-on-prem/on-premise-sources/direct-sources#network-stream-sources try it here!]<br>
 +
|}
 +
<br>
  
 
==Introduction==
 
==Introduction==
Line 12: Line 19:
  
 
==Mapping: Creating a RTP Streamer Source==
 
==Mapping: Creating a RTP Streamer Source==
[[File:RTP_Streamer.png| 500px|right|thumb| Creating RTP Streamer Source]]
+
[[File:RTP_Streamer.png| 400px|right|thumb| Creating RTP Streamer Source]]
 
'''Mapping''' allows you to bind specific display(s) to RTP Streamer. To create this source:
 
'''Mapping''' allows you to bind specific display(s) to RTP Streamer. To create this source:
 +
<ol start="1">
 +
 +
<li> Click on <tt>Mapping > New Source</tt> button. From the drop-down menu select "RTP Streamer" as the preferred source type and give it a name</li>
 +
 +
<li> Enter the Multicast Address</li>
 +
 +
<li> Enter the UDP port number </li>
 +
 +
<li> Select the payload type from the drop-down</li>
  
 +
<li> Select the scaling option as per the requirement (default: Zoom full-screen)</li>
  
# Click on <tt>Mapping > New Source</tt> button. From the drop-down menu select "RTP Streamer" as the preferred source type and give it a name
+
<li> Edit the audio settings as per the requirement</li>
# Enter the Multicast Address
+
 
# Enter the UDP port number
+
<li> Click OK to complete the process</li>
# Select the payload type from the drop-down
+
</ol>
# Select the scaling option as per the requirement (default: Zoom full-screen)
 
# Edit the audio settings as per the requirement
 
# Click OK to complete the process
 
<br>
 
 
<br>
 
<br>
 +
  
 
Currently, RTP Streamer supports only MP2T (MPEG Transport Stream) payload type. Support for more payload types would be added in future release.
 
Currently, RTP Streamer supports only MP2T (MPEG Transport Stream) payload type. Support for more payload types would be added in future release.
Line 31: Line 45:
  
 
==Map Displays to RTP Streamer Source==
 
==Map Displays to RTP Streamer Source==
Once the source is created, displays or video walls can be "mapped" or assigned by simply dragging-and-dropping the display or video wall icons to the RTP Streamer source.
+
Once the source is created, displays or video walls can be "mapped" or assigned by simply dragging-and-dropping the display or video wall icons to the RTP Streamer source. To change the existing source configuration (e.g., to change multicast address) click on the source name to open the "Edit Source" window and make the changes.<br>
 
+
<br>
To change the existing source configuration (for example, to change protocol), click on the source name to open the "Edit Source" window and make the changes.
 
  
 
'''Note: Changes will not take effect until the "Apply" button is clicked.'''
 
'''Note: Changes will not take effect until the "Apply" button is clicked.'''
Line 40: Line 53:
 
==Related Links==
 
==Related Links==
 
* [[Docs/Mapping |Mapping Guide]]
 
* [[Docs/Mapping |Mapping Guide]]
 +
* [[Docs/Capture_Sources|Capture Sources]]
 
* [[Docs/Control Center | Control Center]]
 
* [[Docs/Control Center | Control Center]]
 +
* [[Docs/FAQs/Capture_and_Playback | FAQs]]
  
 
{{forcewhitespace}}
 
{{forcewhitespace}}
  
 
[[Category:Docs]]
 
[[Category:Docs]]
<!--[[Category:Station Mapping]]-->
 

Latest revision as of 18:23, 9 February 2021


Copyright © 2021 Userful Corporation. All rights reserved.
(Updated 2021.02.09)


To return to the main documentation page, Click Here.



Note: This page has been updated in our new Support Portal - try it here!


Introduction

RTP Streamer allows you to play video feeds over the network. This source uses RTP (Real-time Transport Protocol) for delivering audio and video over IP network.

Mapping: Creating a RTP Streamer Source

Creating RTP Streamer Source

Mapping allows you to bind specific display(s) to RTP Streamer. To create this source:

  1. Click on Mapping > New Source button. From the drop-down menu select "RTP Streamer" as the preferred source type and give it a name
  2. Enter the Multicast Address
  3. Enter the UDP port number
  4. Select the payload type from the drop-down
  5. Select the scaling option as per the requirement (default: Zoom full-screen)
  6. Edit the audio settings as per the requirement
  7. Click OK to complete the process



Currently, RTP Streamer supports only MP2T (MPEG Transport Stream) payload type. Support for more payload types would be added in future release.


Map Displays to RTP Streamer Source

Once the source is created, displays or video walls can be "mapped" or assigned by simply dragging-and-dropping the display or video wall icons to the RTP Streamer source. To change the existing source configuration (e.g., to change multicast address) click on the source name to open the "Edit Source" window and make the changes.

Note: Changes will not take effect until the "Apply" button is clicked.

Related Links