Difference between revisions of "Docs/Mapping/RTP Streamer"

From Userful Support
< Docs‎ | Mapping
Jump to navigationJump to search
Line 1: Line 1:
 
{{Public Support Wiki}}
 
{{Public Support Wiki}}
  
{{DISPLAYTITLE: Station Mapping: RTP Streamer}}
+
{{DISPLAYTITLE: Mapping: RTP Streamer}}
 
{{CopyrightNotice}}
 
{{CopyrightNotice}}
  
Line 8: Line 8:
 
==Introduction==
 
==Introduction==
  
RTP Streamer allows you to play video feeds over the network. This session container uses RTP (Real-time Transport Protocol) for delivering audio and video over IP network.
+
RTP Streamer allows you to play video feeds over the network. This source uses RTP (Real-time Transport Protocol) for delivering audio and video over IP network.
 
<br>
 
<br>
  
==Station Mapping: Creating a RTP Streamer Session Container==
+
==Mapping: Creating a RTP Streamer Source==
[[File:RTP_Streamer.png| 500px|right|thumb| Creating RTP Streamer Session Container]]
+
[[File:RTP_Streamer.png| 500px|right|thumb| Creating RTP Streamer Source]]
'''Station Mapping''' allows you to bind specific station(s) to RTP Streamer. To create this session container:
+
'''Mapping''' allows you to bind specific display(s) to RTP Streamer. To create this source:
  
  
# Click on <tt>Station Mapping > New Session Container</tt>. From the drop-down menu select "RTP Streamer" as the preferred session container type and give it a name
+
# Click on <tt>Mapping > New Source</tt> button. From the drop-down menu select "RTP Streamer" as the preferred source type and give it a name
 
# Enter the Multicast Address
 
# Enter the Multicast Address
 
# Enter the UDP port number  
 
# Enter the UDP port number  
Line 30: Line 30:
 
<br clear="all"/>
 
<br clear="all"/>
  
==Map Displays to RTP Streamer==
+
==Map Displays to RTP Streamer Source==
Once the session container is created, displays or video walls can be "mapped" or assigned by simply dragging-and-dropping the display or video wall icons to the RTP Streamer session container.
+
Once the source is created, displays or video walls can be "mapped" or assigned by simply dragging-and-dropping the display or video wall icons to the RTP Streamer source.
  
To change the existing session container configuration (for example, to change protocol), click on the session name to open the "Edit Session Container" window and make the changes.
+
To change the existing source configuration (for example, to change protocol), click on the source name to open the "Edit Source" window and make the changes.
  
 
'''Note: Changes will not take effect until the "Apply" button is clicked.'''
 
'''Note: Changes will not take effect until the "Apply" button is clicked.'''
Line 39: Line 39:
  
 
==Related Links==
 
==Related Links==
* [[Docs/Station Mapping |Station Mapping Guide]]
+
* [[Docs/Mapping |Mapping Guide]]
 
* [[Docs/Control Center | Control Center]]
 
* [[Docs/Control Center | Control Center]]
  
Line 45: Line 45:
  
 
[[Category:Docs]]
 
[[Category:Docs]]
[[Category:Station Mapping]]
+
<!--[[Category:Station Mapping]]-->

Revision as of 22:04, 23 February 2017


Copyright © 2017 Userful Corporation. All rights reserved.
(Updated 2017.02.23)


To return to the main documentation page, Click Here.


Introduction

RTP Streamer allows you to play video feeds over the network. This source uses RTP (Real-time Transport Protocol) for delivering audio and video over IP network.

Mapping: Creating a RTP Streamer Source

Creating RTP Streamer Source

Mapping allows you to bind specific display(s) to RTP Streamer. To create this source:


  1. Click on Mapping > New Source button. From the drop-down menu select "RTP Streamer" as the preferred source type and give it a name
  2. Enter the Multicast Address
  3. Enter the UDP port number
  4. Select the payload type from the drop-down
  5. Select the scaling option as per the requirement (default: Zoom full-screen)
  6. Edit the audio settings as per the requirement
  7. Click OK to complete the process



Currently, RTP Streamer supports only MP2T (MPEG Transport Stream) payload type. Support for more payload types would be added in future release.


Map Displays to RTP Streamer Source

Once the source is created, displays or video walls can be "mapped" or assigned by simply dragging-and-dropping the display or video wall icons to the RTP Streamer source.

To change the existing source configuration (for example, to change protocol), click on the source name to open the "Edit Source" window and make the changes.

Note: Changes will not take effect until the "Apply" button is clicked.

Related Links