Difference between revisions of "Docs/Display Panel Size"

From Userful Support
Jump to navigationJump to search
Line 28: Line 28:
 
[[File:Display_Panel_Size.png|600px|thumb]]
 
[[File:Display_Panel_Size.png|600px|thumb]]
  
== Configuring Display Size ==
+
== Configuring Display Panel Size ==
 
 
# Open Control Center, click <tt> Station Mapping > New Video Wall > Switch to Artistic </tt>
 
# Click the drop-down select-box in the center of the "display" and then select the ID# that will be in that position of the video wall. Use the “Show Station IDs” button to view the ID# on the physical displays.
 
# Click on the display that you want to input the size and click on the settings (wheel) on the top right corner of the display
 
# Input the display size you measure and click "OK".
 
  
 +
# Open Control Center, navigate to: <tt><i> Station Mapping > New Video Wall > Switch to Artistic </i></tt>
 +
# Assign a station to the display by choosing the station ID from the drop-down list in the middle of the displays
 +
# Use the “Show Station IDs” button to view the IDs on the physical displays
 +
# Select the display where you want to define the "Display Panel Size"
 +
# Click on the gear icon on the top right corner of the display
 +
# Input the display panel size that you have measured
 +
# Select the measurement unit
 +
# Press "OK" to save
 +
<br><br>
 
{| {{Notes}}
 
{| {{Notes}}
| Visit [[Manuals/Userful_Network_Video_Wall/Configuring_Video_Wall | Configuring Video Wall]] page for more details on how to create and configure a Video Wall.
+
| See [[Manuals/Userful_Network_Video_Wall/Configuring_Video_Wall | Configuring Video Wall]] section for more details on how to Create and Configure a Video Wall.
 
|}
 
|}
  
 
{{forcewhitespace}}
 
{{forcewhitespace}}

Revision as of 00:39, 4 March 2015


Copyright © 2015 Userful Corporation. All rights reserved.
(Updated 2015.03.04)


To return to the Userful Network Video Wall main documentation page, Click Here.



Introduction

Userful Network Video Wall gives you the flexibility to mix and match displays of different sizes. This feature is available under Artistic Layout where you need to specify the exact display "panel" size in inches or millimeters for each display.

Measuring Display

Measuring Display Size

Display size is measured diagonally, to measure your display panel size:

  1. Identify two points on your display panel, the first point will be one of the screen corners - this is the corner of the display panel, not the bezel.

The second point will be the opposite corner from the first (for example, measure from the top left corner of the panel to the bottom right corner as shown in the image).

  1. Place and hold the end of your measuring tape down at the first corner of the screen, and extend the measuring tape until you reach the second corner.
  2. Read the mark on the tape at the point where the tape reaches the second corner. The number you see will be the size of your display.
Note: Most measurement tapes measure in 16th of inches, but the value you need is in the decimals. To convert simply divide the fraction in your measurement by 16 (e.g. 40 12/16” will be 40.75”)


Display Panel Size.png

Configuring Display Panel Size

  1. Open Control Center, navigate to: Station Mapping > New Video Wall > Switch to Artistic
  2. Assign a station to the display by choosing the station ID from the drop-down list in the middle of the displays
  3. Use the “Show Station IDs” button to view the IDs on the physical displays
  4. Select the display where you want to define the "Display Panel Size"
  5. Click on the gear icon on the top right corner of the display
  6. Input the display panel size that you have measured
  7. Select the measurement unit
  8. Press "OK" to save



See Configuring Video Wall section for more details on how to Create and Configure a Video Wall.