Supported Video Cards
From Userful Support
Supported Video Cards
Copyright © 2008-2010 Userful Corporation. All rights reserved.
(Updated 2010.7.20)
Contents |
To facilitate purchase of hardware compatible with Userful Multiplier™, specific video cards are listed below in three color coded categories Recommended, Might Work and Known Incompatible.
Recommended
The following list of video cards represents cards that have been tested with Userful Multplier.
- Video card/Multiplier version combinations indicated by "✔" (a green check mark) are known to work under most circumstances.
- While it is impossible to guarantee that these cards will work in all combinations with all motherboards, we recommend purchasing one of the card models listed below that has been tested and is known to work.
- If the card works but requires a specific driver version, that note replaces the ✔
- Video card/Multiplier version combinations that do not work and are not supported are indicated with "✘" (a red X).
- Video card/Multiplier combinations without a symbol have not been tested.
Userful supports and recommends the following low cost single chip, dual head chipsets, which are available as AGP, PCI or PCI-E cards from a variety of manufacturers:
| Video Cards | Userful Multiplier | |||
| ATI | v. 320 | v.325 | v.3.7 | v.3.8 |
| Radeon™ 7000 | ✔ | ✔ | ✘ | ✔ |
| Radeon™ 7500 | ✔ | ✔ | ✔ | |
| Radeon™ 9000 | ✔ | ✔ | ||
| Radeon™ 9200 | ✔ | ✔ | ||
| Radeon™ 9250 | ✔ | ✔ | ✘ | ✔ |
| Radeon™ X300 | ✔ | ✔ | ||
| Radeon™ X550 | ✔ | ✔ | ||
| Radeon™ X 1000 series | ✔ | ✔ | ||
| Radeon™ HD 2000 series | ✔ | ✔ | ||
| Radeon™ HD 3000 series | ✔ | ✔ | ||
| Video Cards | Userful Multiplier | |||
| NVIDIA – proprietary drivers required | v. 320 | v.325 | v.3.7 | v.3.8 |
| GeForce FX 4400 (not supported by Ubuntu 10.04) | driver v.173 | driver v.173 | driver v.173 | |
| GeForce FX 5200 (not supported by Ubuntu 10.04) | driver v.173 | driver v.173 | driver v.173 | ✘ |
| e-GeForce 6200TC | driver v.195 | |||
| e-GeForce N6201 | driver v.195 | |||
| e-GeForce 6600GT | driver v.195 | |||
| GeForce 6600GT | ✔ | ✔ | ✔ | |
| e-GeForce 7200GS | driver v.195 | |||
| GeForce 7200/7300GS | ✔ | ✔ | ✔ | |
| GeForce 7600GS | ✔ | ✔ | ✔ | driver v.195 |
| GeForce 8000 series | ✔ | ✔ | ||
| GeForce 8400GS (not supported by Ubuntu 10.04) | driver v.185 | driver v.185 | driver v.195 | |
| GeForce N8400GS | driver v.195 | |||
| GeForce EN8400GS | driver v.195 | |||
| GeForce NX8400GS | driver v.195 | |||
| Geforce 9000 series | ✔ | ✔ | ||
| e-Geforce 9400GT | driver v.195 | |||
| e-Geforce 9500GT | driver v.195 | |||
| Quadro FX 500 | ✔ | ✔ | ✔ | |
| Quadro FX 600 | ✔ | ✔ | ✔ | |
| Quadro NVS 280 | ✔ | ✔ | ✔ | |
| Quadro NVS 285 | ✔ | ✔ | ✔ | driver v.195 |
| Quadro NVS 400 | ✔ | ✔ | ✔ | |
| Quadro NVS 440 | ✔ | ✔ | ✔ | |
| GeForce4 MX 440 | ✔ | ✔ | ✔ | |
| GeForce2 MX/MX400 | ✔ | ✔ | ✔ | |
| Video Cards | Userful Multiplier | |||
| Matrox – proprietary drivers required | v. 320 | v.325 | v.3.7 | v.3.8 |
| G400 Series | ✔ | ✔ | ✔ | |
| G450 Series | ✔ | ✔ | ✔ | |
| G550 Series | ✔ | ✔ | ✔ | |
Guidelines:
- Mixing multiple brands of video cards can produce unexpected problems.
- When installing Ubuntu, please use NVIDIA driver version 173 for older cards such as GE5200. Version 180 will work with Series 7 and higher (unless otherwise indicated in the table above).
- Installing PCI-E card will disable on-board video output by default.
- Older NVIDIA Cards: NVIDIA has a Unified driver that supports the majority of their popular and modern GPUs. They also have two legacy drivers for their older legacy GPUs. Since only one driver can be used simultaneously per system, combining older NVIDIA GPU chipsets in the same system with recent ones can cause some of the cards to not function. If you are mixing older NVIDIA cards and are uncertain whether this will be a problem here is a list of which models use the Unified and Legacy (96.43.xx and 71.86.xx) Drivers for reference. (This is not a problem with ATI cards)
- DVI Outputs: Userful Multiplier version 320 or less only supports automated configuration of VGA and DVI-convert-to-VGA outputs, cards with DVI ONLY (cards incompatible with DVI to VGA adapters) will most likely not have any output from the DVI slot after the automated configuration is complete. This can be fixed by manually editing the configuration files
- Userful Multiplier version 325 will support direct DVI (not DVI-D) input without the use of VGA-DVI converter.
Might Work
Any video card supported by Linux (unless listed in the "Known Incompatible" Section below) will likely work just fine with Userful Multiplier. Hence most cards will fit in this "might work" category.
Userful Multiplier is designed to support all single, dual, and quad-headed video cards, supported by X.Org/XFree86. Any video card combinations where you can start X in multi-headed mode (i.e. multi-monitor, multi-display) should work with Userful Multiplier.
Below is a partial list of untested cards which may work.
- Cards with DISPLAYPORT
- ATI
- Rage XL QUAD Display Card
- NVIDIA
- e-GeForce 6200
If you have purchased a card (not listed in our "Known Incompatible" section below) with which you are encountering problems, please email us at multiplier@userful.com and we will work with you to help resolve the problem.
Known Incompatible
- Cards with a HDMI or DisplayPort standalone port (does not include DVI-to-HDMI adapter port)
- ATI
- Dual-Head Radeon Mobility series
- Radeon HD 4000 series
- Radeon HD 5000 series
- NVIDIA
- GeForce 100/200 Series
- Intel
- Intel NM10 Express Graphics chipset (usually found together with Intel Atom processors), as on:
- Intel D510MO/D410PT motherboards
- Intel NM10 Express Graphics chipset (usually found together with Intel Atom processors), as on:
Please do not purchase these for use with Userful Multiplier, nor contact Userful Support regarding these video cards. Support for these video cards may be included in future releases. However, they are currently not supported.
