Multi-IP Configuration

From Userful Support

Userful Desktop can be configured to assign each station its own IP address. To configure multiple IP addresses for each Userful Desktop computer:

1. Start the Network configuration tool.
   • This can be done either from the initial setup "Network" session or by clicking the "Network" icon on the admin mode desktop.
2. Configure a static IP address, along with a subnet mask and a gateway address.
3. Check the "Enable Multiple IP Address Configuration".
4. Click the "Configure Multiple IP address..." button.
   • A "Multiple IP Address Configuration Tool" dialog will appear.
5. Enter an IP address for each station.
   • Multiple stations with the same IP addresses is allowed.
6. Click OK on the "Multiple IP Address Configuration Tool" dialog.
7. Click OK on the "Userful Network Configuration" dialog.
   • Settings will be applied right away. There is no need to logout.