Userful: Station Mapping

From Userful Support
< Docs
Revision as of 13:04, 23 February 2017 by Navdeep (Talk | contribs)

Jump to: navigation, search


Copyright © 2017 Userful Corporation. All rights reserved.
(Updated 2017.02.23)


To return to the main documentation page, Click Here.


Introduction

Userful's Control Center lets adminstrators "map" stations and video walls via an intuitive drag-and-drop interface to "roles" or "content sources" (session containers). This document provides a brief overview of Userful's Station Mapping functionality. For more details on a given session container type, please refer to the specific session container guide (see below).

Station Mapping Screen

In the example shown to the right:

  • Stations 1, 14, 15, 16 (the onboard station) are mapped to the default "Welcome Screen"
  • Stations 2-5 are configured as a video wall setup playing 1080p media content under Zone-1
  • Stations 6-9 are mapped to Web Browser session container
  • Stations 10-13 are configured as a video wall setup playing Signage content under Zone-2

Note: Name of the video wall zone is visible on the top of the video wall icon

Access this functionality by opening the Control Center > Station Mapping.
.

Configuring Session Containers

Creating new Session Container

By default, all stations including the Userful host are mapped to session container group (i.e. "Welcome Screen"). User can launch any session container from the available list by simply clicking the session container name.
"Welcome Screen" displays list of available sessions and system / zero-client device information, including Station ID, MAC Address and IP Address. However, to create a new session container:

  • Click on New Session Container button
  • Give a name, and then use the drop-down menu to select amongst the various session container types available (click the link for the specific session container guide):



Drag & Drop Stations

Drag and Drop functionality

Once created, stations can be "mapped" or assigned by dragging-and-dropping the station icons to the desired session container. All mapped stations will have yellow background, until changes are applied.
In other words, changes will not take effect until the "Apply" button is clicked.


Mirror Group

Mirror Group feature allows users to run same content on multiple displays. Following are the key advantages:

  • Optimal CPU utilization (processing content only once when outputting identical content to multiple displays including a video wall)
  • Perfect content synchronization
  • Reduced complexity (managing a single station per group)

To create "Mirror Group":

  • Click Mirror Group.png icon available on the right side of the "Welcome Screen" to open "Mirror Group Configuration" window
  • Click "On" and select "Control Station" from the drop-down (control station is the station designated for mirroring i.e. all the stations in the group, render the same content as per the control station)
  • Click "OK" to complete the process

Once created, all the stations and video walls mapped to the session container will play content in perfect synchronization.

Changes will not take effect until the "Apply" button is clicked.

Please Note: You can not create mirror group for the default "Welcome Screen" and the default scaling options for all session containers (except Network Streamer and Signage Player) in a mirror group is "Zoom full-screen".

Save Preset

Save Preset feature allows users to create and save a variety of preset settings (i.e station mapping configuration) and launch those settings using a single click. To create presets:

Save Preset
  • Go to Control Center > System Operations > Preset Settings to enable Preset Station Mapping and click "OK" to complete the process.
  • Open Station Mapping tab and configure the settings of displays and video walls.
  • Click on the arrow next to the Apply button, to open the Save Preset dialog window as shown in the image to the right.
  • Enter the Preset Name to save the current station mapping configuration and click "OK" to complete the process.


Saved Presets
  • Once completed, click on the link # Saved next to the Station Mapping heading(# represents the number of saved presets), to open the Saved Presets dialog window as shown in the image to the right.
  • Click on the preset name or play icon to launch the selected preset settings.
  • You can also click on the trash icon to delete the saved preset.


Station Settings


Station Settings Window

Control Center > Station Mapping provides an easy access to station-level settings. This feature allows user to change Station ID, display resolution and view information including connected devices, location and IP Address.

To access Station Settings, single-click an assigned station; "Edit Station" dialog will open (as shown in the image to the right), edit settings and click "OK".

Station Status

Besides different roles, Station Mapping page also provides status of each and every station, as described below:

Unassigned station.png Unassigned Station.
  • Unassigned stations (status offline) have black station icon with an option to remove.
Online station.png Online Station.
  • Assigned stations have blue station icon with station id.
Unmapped Station.png Unmapped Station.
  • Assigned Stations that are not mapped to any session container have black station icon with station id.


Related Links