Userful™: Control Center
Copyright © 2019 . All rights reserved.
To return to the main documentation page, Click Here.
The Control Center is a browser-based central management interface for administering Userful™ software appliance. It can be accessed over a Local Area Network (LAN) without an Internet connection. However, some features such as licensing and system updates requires Internet access. The Control Center can be accessed from any web browser on any system within the same network or over the Internet, provided you have proper port forwarding in place.
Administrators can manage, map and perform essential system operations from the Control Center.
Following are some key features of the Control Center:
- Video Wall
- Managing Displays
- Network interface management
- Storage management
- License management
- System updates
- Access to support
Accessing the Control Center
There are several ways to access Control Center:
- Using the Desktop shortcut
Login to the Linux Desktop from any session and click on the desktop shortcut to open the Control Center. You can also use the native administration tool available under System > Administration > Userful Control Center.
- Using the IP Address
IP Address of the Userful host that you want to manage into your browser's address bar. The IP address is displayed at the bottom of the screen at the default startup screen after the first installation. If no welcome screen is present, the IP address should still be visible if a monitor is connected to the VGA port on the Userful host.
- Using Server Name
If your local network has been set up to route server names, you can use the Userful server's name (which may be easier to remember than IP address). For networks configured this way, simply open a web browser and enter the
hostname in the address bar.
- Using localhost
If you are accessing Control Center from one of the displays attached to the Userful server, you can simply enter
http://localhost in the browser address bar.
Note: Control Center can be accessed via most popular web browsers except IE8, IE9, and IE10.
The major sections of the Control Center are listed here:
(Each of these will be discussed in detail below).
A drop-down on the top of the left navigation panel lists down the Userful hosts available within the same subnet along with their IP Addresses.
This section represents a snapshot of current system status, displays that are online or offline, sources and video walls created. Mapping provides the ability to "map" displays or video walls to "Sources" such as video playback or URL kiosks via an intuitive drag-and-drop interface. Please refer to Mapping for more information.
This section lists all the receiver devices (i.e., displays) that are connected to the Userful server, the administrator can give user-friendly names and location tags to displays thus making managing large numbers of displays easier. It also highlights zero-client device's model, firmware version, and speed. Please refer to Managing Displays for more information.
This section lists down all the functions that affect the entire system (i.e., the Userful server and all the connected displays) including:
- Managing Licensing
- Changing Server Name
- Failover Group Settings
- Remote Control Settings
- Performance Settings
- Broadcast Alert
- Receiver Device Configuration
- Storage Management
- User Management
- Power Management
- Reboot/Shutdown the system
- Network Settings
- Managing Updates
- Changing System Date/Time and Language
Please refer to Settings for more information.
This section highlights general troubleshooting guidelines for Userful software. Please refer to Support for more information.